Shampoo
Fluffy Foam Shampoo
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | Balance |
| － | Polyquaternium-10 | Conditioning, Thickener | 0.50 | |
| B | NISSAN ANON™ BDF-R | Cocamidopropyl Betaine, Water | Improve detergency, foam quality | 20.00 |
| PERSOFT™ EF | Sodium Laureth Sulfate, Water | Improve detergency, foam quality | 10.00 | |
| DIAPON™ K-SF | Sodium Methyl Cocoyl Taurate, Water | Improve detergency, foam quality | 10.00 | |
| SOFTILT™ AS-L | Sodium Lauroyl Methylaminopropionate, Water | Improve detergency, Thickener | 10.00 | |
| NONION™ DL-40HN(W) | PEG-75 Dilaurate, Water | Thickener, Improve foam volume | 2.00 | |
| MACBIOBRIDE™ MG-T | PEG-120 Methylglucose Triisostearate, Water | Thickener | 0.60 | |
| UNISAFE™ PGML | Propylene Glycol Laurate | Thickener | 0.50 | |
| Preservative | － | Preservative | q.s. | |
| C | － | Citric Acid | pH adjuster | q.s. | D | NONION™OT-221 | Polysorbate 80 | Solubilizer | 0.80 | － | Fragrance | － | q.s. |
Typical Physical Properties : pH (Undiluted Solution) 6.0, Viscosity (Undiluted Solution, 25 ℃) 3,000～5,000 mPa・s
Preparation Method
- Measure the phase-A ingredients and stir at room temperature until evenly mixed.
- Heat the phase-A ingredients to 80±5 ℃ and add the phase-B ingredients.
- Add the phase-C ingredient and stir at 80±5 ℃ until evenly mixed.
- After cool down to 25±5 ℃, add the phase-D ingredients before mixed at 25±5 ℃, and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Rich Foam Non-silicon Shampoo
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | Balance |
| － | Polyquaternium-10 | Conditioning, Thickener | 0.50 | |
| B | NISSAN ANON™ BDF-R | Cocamidopropyl Betaine, Water | Improve detergency, foam quality | 16.70 |
| PERSOFT™ EF | Sodium Laureth Sulfate, Water | Improve detergency, foam quality | 16.40 | |
| LUMINOVEIL™ HS-L | Sodium Lauroyl Hydroxyethyl Beta-alaninate, Water | Improve detergency, foam elasticity | 3.00 | |
| RG・CO・P™ | Glycerin | Moisturizer | 2.00 | |
| STAFOAM™DL | Lauramide DEA | Thickener, Improve foam volume | 1.50 | |
| LIPIDURE®-C | Polyquaternium-64, Water, Phenoxyethanol | Conditioning | 0.10 | |
| － | Glycosyl Trehalose | Moisturizer | 0.10 | |
| Preservative | － | Preservative | q.s. | |
| C | － | Citric Acid | pH adjuster | q.s. | D | NONION™OT-221 | Polysorbate 80 | Solubilizer | 0.80 | － | Fragrance | － | q.s. |
Typical Physical Properties : pH (Undiluted Solution) 6.0, Viscosity (Undiluted Solution, 25 ℃) 870 mPa・s
Preparation Method
- Measure the phase-A ingredients and stir at room temperature until evenly mixed.
- Heat the phase-A ingredients to 80±5 ℃ and add the phase-B ingredients.
- Add the phase-C ingredient and stir at 80±5 ℃ until evenly mixed.
- After cool down to 25±5 ℃, add the phase-D ingredients before mixed at 25±5 ℃, and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
High-blending Oil Shampoo
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | Balance |
| － | Polyquaternium-10 | Conditioning, Thickener | 0.25 | |
| B | LUMINOVEIL™ HS-L | Sodium Lauroyl Hydroxyethyl Beta-alaninate, Water | Improve detergency,foam quality, foam elasticity | 50.00 |
| DIAPON™ HF-SF | Sodium Caproyl Methyltaurate, Water | Improve foam volume | 15.00 | |
| NISSAN ANON™ BDF-SF | Cocamidopropyl Betaine, Water | Improve detergency, foam quality | 11.00 | |
| Preservative | － | Preservative | q.s. | |
| C | UNIOX™ ST-40E | Sorbeth-40 Tetraoleate | Solubilizer | 6.00 |
| － | Olea Europaea (Olive) Fruit Oil | Conditioning | 2.00 | |
| － | Argania Spinosa Kernel Oil | Conditioning | 1.00 | |
| D | － | Citric Acid | pH adjuster | q.s. |
| E | NONION™ OT-221 | Polysorbate 80 | Solubilizer | 0.80 |
| － | Fragrance | － | q.s. |
Typical Physical Properties : pH (Undiluted Solution) 6.1, Viscosity (Undiluted Solution, 25 ℃) 330 mPa・s
Preparation Method
- Measure the phase-A ingredients and stir at room temperature until evenly mixed.
- Heat the phase-A ingredients to 80±5 ℃ and add the phase-B ingredients.
- Separately, measure the phase-C ingredients and stir at 80±5 ℃ until evenly mixed.
- Add (3) solution to (2) solution and stir until evenly mixed.
- Add the phase-D ingredient and stir at 80±5 ℃ until evenly mixed.
- After cool down to 25±5 ℃, add the phase-E ingredients before mixed at 25±5 ℃, and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Moist Shampoo
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | Balance |
| － | Polyquaternium-10 | Conditioning, Thickener | 1.20 | |
| B | DIAPON™ K-SG | Sodium Taurine Cocoyl Methyltaurate, Water | Improve detergency, foam quality, Moisturizer |
18.60 |
| NISSAN ANON™ BDF-SF | Cocamidopropyl Betaine, Water | Improve detergency, foam quality |
15.00 | |
| SOFTILT™ AS-L | Sodium Lauroyl Methylaminopropionate, Water | Improve detergency, Thickener | 11.00 | |
| － | Dipropylene Glycol | Moisturizer | 4.00 | |
| － | Butylene Glycol | Moisturizer | 2.00 | |
| － | Caprylyl/Capryl Glucoside | Improve foam volume | 2.00 | |
| － | Disodium Cocoyl Glutamate | Improve foam volume | 1.50 | |
| STAFOAM™ DL | Lauramide DEA | Thickener, Improve foam volume | 0.90 | |
| Preservative | － | Preservative | q.s. | |
| C | － | Citric Acid | pH adjuster | q.s. | D | NONION™OT-221 | Polysorbate 80 | Solubilizer | 0.80 | － | Fragrance | － | q.s. |
Typical Physical Properties : pH (Undiluted Solution) 5.9, Viscosity (Undiluted Solution, 25 ℃) 1,450 mPa・s
Preparation Method
- Measure the phase-A ingredients and stir at room temperature until evenly mixed.
- Heat the phase-A ingredients to 80±5 ℃ and add the phase-B ingredients.
- Add the phase-C ingredient and stir at 80±5 ℃ until evenly mixed.
- After cool down to 25±5 ℃, add the phase-D ingredients before mixed at 25±5 ℃, and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Smooth and Volume-rich Shampoo
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | Balance |
| － | Polyquaternium-10, Polyquaternium-7 | Conditioning, Thickener | 0.90 | |
| B | DIAPON™K-SF | Sodium Methyl Cocoyl Taurate, Water | Improve detergency, foam quality | 30.00 |
| NISSAN ANON™ BL-SF | Lauryl Betaine, Water | Improve detergency, foam quality | 15.00 | |
| SOFTILT™ AX-L | Sodium Taurine Lauroyl Methyl Beta-alaninate, Water | Improve detergency, Thickener | 4.80 | |
| NISSAN ANON™ LA | Disodium Lauriminodiacetate, Water | Improve detergency, foam quality | 4.20 | |
| NONION™ DL-40HN(W) | PEG-75 Dilaurate, Water | Thickener, Improve foam volume | 2.00 | |
| － | Dipropylene Glycol | Moisturizer | 2.00 | |
| STAFOAM™ MF | Cocamide MEA | Thickener, Improve foam volume | 0.80 | |
| － | Disodium Cocoyl Glutamate | Improve foam volume | 0.50 | |
| Preservative | － | Preservative | q.s. | |
| C | － | Citric Acid | pH adjuster | q.s. | D | NONION™OT-221 | Polysorbate 80 | Solubilizer | 0.80 | － | Fragrance | － | q.s. |
Typical Physical Properties : pH (Undiluted Solution) 5.7, Viscosity (Undiluted Solution, 25 ℃) 370 mPa・s
Preparation Method
- Measure the phase-A ingredients and stir at room temperature until evenly mixed.
- Heat the phase-A ingredients to 80±5 ℃ and add the phase-B ingredients.
- Add the phase-C ingredient and stir at 80±5 ℃ until evenly mixed.
- After cool down to 25±5 ℃, add the phase-D ingredients before mixed at 25±5 ℃, and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.