Cleansing
Mild Cleansing Water
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | SOLUBULE™ BR-02 | PPG-30-Buteth-30 | Main cleansing agent | 3.00 |
WILBRIDE™ S-753D | PEG/PPG/Polybutyleneglycol-8/5/3 Glycerin, Tocopherol | Improve detergency | 2.00 | |
- | Butylene Glycol | High temperature stabilizer | 1.00 | |
NONION™ LT-221 | Polysorbate 20 | High temperature stabilizer | 0.80 | |
WILSURF™ EX | Listed | Preservative | 0.20 | |
- | Polyquaternium-10 | Prevent the readhesion | 0.10 | |
- | EDTA-2Na | Chelating agent | 0.10 | |
- | Water | - | 92.80 |
Preparation Method
- Weigh all ingredients of phase A and mix uniformly at R.T..
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Oil Free Cleansing Gel
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | - | Water | - | 55.50 |
- | Acrylates/C10-30 Alkyl acrylate Crosspolymer | Thickener | 0.43 | |
B | SOLUBULE™ BR-02 | PPG-30-Buteth-30 | Main Cleansing agent | 5.00 |
WILBRIDE™ S-753D | PEG/PPG/Polybutyleneglycol-8/5/3 Glycerin, Tocopherol | Improve detergency | 3.00 | |
- | Dipropylene Glycol | Moisturizer | 10.00 | |
- | Butylene Glycol | Moisturizer | 20.00 | |
- | Glycerin | Moisturizer | 5.00 | |
- | Pentylene Glycol | Preservative | 1.00 | |
C | - | 48% KOH | Neutralizer | 0.07 |
pH (Undiluted Solution) 5.5 Viscosity (25℃ ) 25000 mPa・s
<Preparation Method>
- Add polymer into water by little and little, and homogenize it at 3000 rpm.
- Add phase B into phase A and mix uniformly at R.T.
- Add phase C into phase A+B and mix uniformly at R.T.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Moisturizing Cleansing Oil
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | PARLEAM® 4 | Hydrogenated Polyisobutene | Oil | 19.50 |
UNISTER MB-816 | Ethylhexyl Palmitate | Oil | 28.00 | |
ACROBUTE™ MB-52 | PPG-52 Butyl Ether | Moisturizing oil | 2.00 | |
UNIOX™ ST-30IS | Sorbeth-30 Tetraisostearate | Rinsing ability | 21.00 | NOFABLE™ SO-851S | Sorbitan Oleate | Water proof | 3.50 |
- | Glyceryl Laurate | Water proof | 3.00 | |
NONION LT-20 | Polysorbate 20 | Stabilizer at high temperature | 6.50 | |
NOFABLE™ EO-85S | Ethyl Oleate | Oil | 6.00 | |
UNILUBE™ 50MB-11 | PPG-10 Buteth-9 | Rinsing ability | 6.50 | |
- | Water | - | 4.00 |
Preparation Method
- Weigh ingredients and mix uniformly at R.T.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
BCME type Cleansing Liquid
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | PARLEAM® | Hydrogenated Polyisobutene | Improve detergency | 6.00 |
UNISTER™ MB-816 | Ethylhexyl Palmitate | Improve detergency | 5.00 | |
PARLEAM® 4 | Hydrogenated Polyisobutene | Improve detergency | 4.00 | |
WILSURF™ BM-C | PEG-7 Glyceryl Cocoate, Glycereth-7 | BCME formation | 30.00 | RG・CO・P™ | Glycerin | Low temperature stabilizer | 27.00 |
DIAPON™ K-SF | Sodium Methyl Cocoyl Taurate, Water | High temperature stabilizer | 1.00 | |
- | Pentylene Glycol | Preservative | 1.00 | |
- | Water | - | 26.00 |
Preparation Method
- Weigh all ingredients for phase A and mix uniformly at R.T..
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
BCME-type Cleansing Gel
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | - | Water | - | 26.20 |
- | Acrylates/C10-30 Alkyl acrylate Crosspolymer | Thickener | 0.43 | |
B | PARLEAM® | Hydrogenated Polyisobutene | Improve detergency | 6.00 |
UNISTER™ MB-816 | Ethylhexyl Palmitate | Improve detergency | 5.00 | |
PARLEAM®4 | Hydrogenated Polyisobutene | Improve detergency | 4.00 | |
WILSURF™ BM-C | PEG-7 Glyceryl Cocoate, Glycereth-7 | BCME formation | 30.00 | RG・CO・P™ | Glycerin | Low temperature stabilizer | 19.00 |
- | Butylene Glycol | High temperature stabilizer | 9.00 | |
- | Phenoxyethanol | Preservative | 0.30 | |
C | - | 48% KOH | Neutralizer | 0.07 |
pH (Undiluted Solution) 5.5 Viscosity (25℃ ) 60000 mPa・s
Preparation Method
- Add polymer into water by little and little, and homogenize it at 3000 rpm.
- Add phase B into phase A and mix uniformly at R.T.
- Add phase C into phase A+B and mix uniformly at R.T.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Phase Inversion Cream Cleansing
Phase | Ingredient | INCI | Purpose | % |
---|---|---|---|---|
A | PARLEAM® LITE | Hydrogenated Polyisobutene | Oil | 30.00 |
ACROBUTE™ MB-52 | PPG-52 Butyl Ether | Moisturizing oil | 2.00 | |
UNISTER MB-816 | Ethylhexyl Palmitate | Oli | 12.00 | |
PARLEAM® 3 | Hydrogenated Polyisobutene | Oil | 10.00 | |
SOLUBULE™ GS-01 | PPG-13-Decyltetradeceth-24 | Emulsifier | 0.50 | |
UNILUBE™ 20MT-2000B | PPG-20-Decyltetradeceth-10 | Emulsifier | 1.00 | |
MONOGLY™ MB | Glyceryl Stearate | Emulsifier | 2.00 | |
NONION™ ST-221 | Polysorbate 60 | Emulsifier | 2.00 | |
NAA™-44 | Cetyl Alcohol | Stabilizer | 1.20 | |
NAA™-45 | Stearyl Alcohol | Stabilizer | 0.80 | |
B | - | Sorbitol | Rinsing ability | 14.90 |
- | Water | - | 18.50 | |
- | BG | Moisturizer | 3.00 | |
- | Sodium Lauryl Sulfate | Stabilizer | 0.10 | |
- | Sodium Stearoyl Glutamate | Stabilizer | 1.00 | |
C | LIPIDURE®-PMB | Polyquaternium-51, Water | Skin protection | 0.50 |
- | Phenoxyethanol | Preservative | 0.50 |
Preparation Method
- Mix the phase A and B separately at 80℃
- Add phase B into phase A and homogenize by homo-mixer(15min, 7000rpm)
- Cool down at R.T. and add phase C
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.